Hose clamps | Features and benefits |
Hose clamps and hose clamp kits |
Index · · · · · · |
John Deere has both standard and heavy-duty hose clamps as well as hose clamp kits with a display merchandiser. |
Standard hose clampsFeatures and benefits· Bands and housing made of stainless-steel to resist rust and corrosion · Screws made of zinc-plated carbon-steel to resist rust and corrosion · 5/16-in. band width – slotted 1/4-in. hex head screw · 1/2-in. band width – slotted 5/16-in. hex head screw · Low-profile screw housing is a one-piece design, mechanically interlocked to the band without the use of spot welds | |
· Rectangular band slots provide a wider “land area” between the slots versus crescent-shaped slots used on many competitors’ clamps – enables the clamp to absorb higher loads and the full radius at the slot ends minimize the stress concentration at these corners |
Light- and standard-duty hose clamps and kits – TY22477 with merchandiser |
The hose clamp merchandiser displays high-activity, light- and standard-duty clamps in an attractive, functional arrangement for easy customer self-selection. See the parts listing below for the contents and part numbers. | |||||
Hose clamp kit with merchandiser | |||||
| Pkg. qty. | Kit | |||
TY22477 | Hose clamp kit with merchandiser | 1 | (15 sizes; 420 pieces) | ||
Kit contents: | |||||
Part | Closed and open range (in.) |
| Pkg. qty | Kit | |
TY22462 | 1/4 – 5/8 | Light | 10 | 50 | |
TY22464 | 7/16 – 25/32 | Standard | 10 | 40 | |
TY22463 | 9/16 – 1-1/16 | Light | 10 | 40 | |
TY22465 | 9/16 – 1-1/16 | Standard | 10 | 40 | |
TY22466 | 11/16 – 1-1/4 | Standard | 10 | 30 | |
TY22467 | 13/16 – 1-3/4 | Standard | 10 | 50 | |
TY22468 | 1-1/16 – 2 | Standard | 10 | 20 | |
TY22469 | 1-5/16 – 2-1/4 | Standard | 10 | 20 | |
TY22470 | 1-9/16 – 2-1/2 | Standard | 10 | 40 | |
TY22471 | 1-13/16 – 2-3/4 | Standard | 10 | 10 | |
TY22472 | 2-5/16 – 3-1/4 | Standard | 10 | 40 | |
TY22473 | 2-13/16 – 3-3/4 | Standard | 10 | 10 | |
TY22474 | 3-9/16 – 4-1/2 | Standard | 10 | 10 | |
TY22475 | 4-1/16 – 5 | Standard | 10 | 10 | |
TY22476 | 4-5/8 – 5-1/2 | Standard | 10 | 10 | |
Standard-duty hose clamp specifications and substitutions· Made of stainless steel · Type "F" and "M" SAE worm-drive hose clamps |
|
| Dimensions in inches |
|
|
| |||
Clamp | Clamp |
|
| |||||
TY22462 | AR48236 | 1/4 | 5/8 | 5/16 | 0.019/0.026 | 0.04 | M | 10 |
TY22463 | AA29204 | 9/16 | 1-1/16 | 5/16 | 0.019/0.026 | 10 | M | 10 |
TY22464 | AR21836 | 7/16 | 25/32 | 1/2 | 0.019/0.026 | 0.06 | F | 10 |
TY22465 | RE32361 | 9/16 | 1-1/16 | 1/2 | 0.019/0.026 | 10 | F | 10 |
TY22466 | AT9195 | 11/16 | 1-1/4 | 1/2 | 0.019/0.026 | 12 | F | 10 |
TY22467 | AT145650 | 13/16 | 1-3/4 | 1/2 | 0.019/0.026 | 20 | F | 10 |
TY22468 | Z21160 | 1-1/16 | 2 | 1/2 | 0.019/0.026 | 24 | F | 10 |
TY22469 | M594M | 1-5/16 | 2-1/4 | 1/2 | 0.019/0.026 | 28 | F | 10 |
TY22470 | AR65294 | 1-9/16 | 2-1/2 | 1/2 | 0.019/0.026 | 32 | F | 10 |
TY22471 | AR40418 | 1-13/16 | 2-3/4 | 1/2 | 0.019/0.026 | 36 | F | 10 |
TY22472 | AT14565 | 2-5/16 | 3-1/4 | 1/2 | 0.019/0.026 | 44 | F | 10 |
TY22473 | AR62936 | 2-13/16 | 3-3/4 | 1/2 | 0.019/0.026 | 52 | F | 10 |
TY22474 | AT25242 | 3-9/16 | 4-1/2 | 1/2 | 0.019/0.026 | 64 | F | 10 |
TY22475 | AU12450 | 4-1/16 | 5 | 1/2 | 0.019/0.026 | 72 | F | 10 |
TY22476 | AT145652 | 4-5/8 | 5-1/2 | 1/2 | 0.019/0.026 | 80 | F | 10 |
TY22539 |
| 3/4 | 1-1/2 | 1/2 | 0.019/0.026 | 16 | F | 10 |
Heavy-duty hose clampsFeatures and benefits· Designed for dependable, high-torque use · For use under extreme-pressure applications where extra torque is required · Delivers over 800 lb. of band tension at 140 inch-pounds of screw torque · Wide profile housing for maximum screw thread-to-band engagement · Features one-piece, extended-band liners – protects hose from band notches · 5/8-in. wide bands provide extra torque capability – bands are .028 inches thick · Clamps are in strict conformance to SAE JK1508 “HD” classified-performance requirements |
Heavy-duty hose clamps specifications and substitutionsFeatures and benefits · Made of stainless steel · Heavy-duty SAE worm drive |
|
| Dimensions in inches |
|
|
| |||
Clamp | Clamp |
|
| |||||
TY22484 | AE43629 | 1-1/4 | 2-1/8 | 5/8 | 0.028 | 212 | HD | 10 |
TY22485 | RE52034 | 1-3/4 | 2-5/8 | 5/8 | 0.028 | 262 | HD | 10 |
TY22486 | RE40437 | 2-1/4 | 3-1/8 | 5/8 | 0.028 | 312 | HD | 10 |
TY22487 | AR85328 | 2-3/4 | 3-5/8 | 5/8 | 0.028 | 362 | HD | 10 |
TY22488 | AH104837 | 3-1/4 | 4-1/8 | 5/8 | 0.028 | 412 | HD | 10 |
TY22489 | AR85329 | 3-3/4 | 4-5/8 | 5/8 | 0.028 | 462 | HD | 10 |
TY22490 | AR98951 | 4-1/4 | 5-1/8 | 5/8 | 0.028 | 512 | HD | 10 |
TY22491 |
| 4-3/4 | 5-5/8 | 5/8 | 0.028 | 562 | HD | 5 |
TY22492 | AR85327 | 5-1/4 | 6-1/8 | 5/8 | 0.028 | 612 | HD | 5 |
TY22493 | AE89602 | 5-3/4 | 6-5/8 | 5/8 | 0.028 | 662 | HD | 5 |
TY22494 | AR60499 | 6-1/4 | 7-1/8 | 5/8 | 0.028 | 712 | HD | 5 |
TY22495 | AN190648 | 6-3/4 | 7-5/8 | 5/8 | 0.028 | 762 | HD | 5 |
TY22496 | AT66469 | 7-1/4 | 8-1/8 | 5/8 | 0.028 | 812 | HD | 5 |
TY22497 | AT103166 | 7-3/4 | 8-5/8 | 5/8 | 0.028 | 862 | HD | 5 |
Last modified: 23Mar09.